IKON 10104/10105/10106 SBus Hardcopy Interfaces [IKON Corporation]

Interface Devices and Controllers

IKON 10104/10105/10106 SBus Hardcopy Interfaces

IKON Corporation

The IKON Models 10104, 10105 and 10106 Hardcopy Interface boards arehigh-performance SBus DMA interlaces for hardcopy output devices. Theycan be configured to drive any Centronics- or Versatec-compatible printeror plotter. The boards share similar base logic, but each is designed tosupport a particular hardware interface. All three boards share a commonUNIX driver. , * 10104 supports Versatec Differential (Long-Lines) "GreenSheet" devices * 10105 supports Versatec TTL "Green Sheet" devices *10106 supports Centronics-compatible devices * 1 to 2 MB/second transferrate * Caching DVMA capability * DVMA transfer rate to FIFO: 8.3MB/sec* Programmed I/0 also supported * Software driver available at no charge(source code included) * FIFO data buffer (4K bytes min) * 1 to 2MB/second transfer rate (max) * FIFO 1/2 full and FIFO empty interrupt *Selectable interrupt level (jumper) * Commands and mode changes passthrough FIFO * Schmitt trigger and r/c noise filters * High drive outputand socketed termination network * Fcode PROM size: 1KB ,, * 800 mA (max)at +5VDC * Commercial temperature range * Humidity tolerance to 90% non-condensing * Single SBus slot (DVMA capability required) * Multilayerconstruction

Language: C
Source Avail: No
Product Special Handling: DVMA capable SBus slot
Operating Systems: Solaris Sparc 1.0,2.0,2.1,2.2,2.3,2.4 Solaris x86 2.1

IKON Corporation
2617 Western Ave
Seattle, WA 98121
USA
Phone: (206) 728-6465
Fax: (206) 728-1633